Thumbnail Image
Publication

Structural and stratigraphic controls on fracture distribution within sand bodies of the Upper Iles and Lower Williams Fork formations, Mamm Creek and Divide Creek fields, Piceance Basin, Colorado

Webber, Robert B.
Citations
Altmetric:
Advisor
Trudgill, Bruce, 1964-
Editor
Date
Date Issued
2014
Date Submitted
2014
Keywords
Piceance Basin
 Mamm Creek field
 Lower Williams Fork Formation
 Divide Creek anticline
 Facies (Geology) -- Colorado -- Piceance Creek Basin
 Formations (Geology) -- Colorado -- Piceance Creek Basin
 Sandstone -- Colorado -- Piceance Creek Basin
 Alluvium -- Colorado -- Piceance Creek Basin
 Rocks -- Fracture
 Sequence stratigraphy
 Piceance Creek Basin (Colo.)
Collections
2010-2019 - Mines Theses & Dissertations
Show all metadata
Files
Thumbnail Image
Thesis
Adobe PDF, 9.17 MB
Data
Unknown, 18.34 MB
Research Projects
Organizational Units
Journal Issue
URI
https://hdl.handle.net/11124/430
Embargo Expires
Abstract
The Mesaverde Group in the Piceance Basin of northwestern Colorado is a continuous tight gas accumulation that has established itself as one of the more prolific producers of natural gas in the Rocky Mountain Region. In the Piceance Basin, the most significant producing intervals within the Mesaverde Group are the Iles and Williams Fork Formations, which provide key reservoir and source aspects of the Mesaverde total petroleum system. The Williams Fork and Iles Formations were deposited by sediment shed from the Sevier fold and thrust belt and transported eastward into the Cretaceous Interior Seaway. As a result of depositional processes and grain composition, the sandstones in these formations have very low permeability, typically less than 0.1 mD; so low that successful production of hydrocarbons requires the presence of fractures, either natural fractures or induced fractures from hydraulic stimulation. Natural fractures have been documented to significantly enhance reservoir permeability. This thesis examines the stratigraphic and structural controls on fracture distribution within the Mamm Creek field through the use of Borehole Image Logs, electrical logs, and outcrop. Sand bodies were divided into 5 different facies associations for fracture analysis, in order to investigate the stratigraphic controls on fracture properties. Positive linear relationships were identified between bed thickness and fracture aperture and spacing; thicker beds support larger fractures with larger apertures. Open and healed-resistive fractures were observed in the study area. The overall mean strike of all fractures in the study area is 315°, with the majority of dips ranging between 81°-90°. Open fractures contain a mean strike of 319°. Healed-resistive fractures contain a mean strike of 122°. The present day stress orientation (SHmax) determined from the orientation of drilling induced tensile fractures in Mamm Creek field is 130°. This orientation is parallel with naturally occurring fractures and creates limitations in connecting natural fractures during hydraulic fracturing. Fracture counts per well and fracture densities increase significantly based on their proximity to the hinge line of the Divide Creek Anticline and the Rifle Syncline. This suggests a strain increase along the hingelines of these features, where the highest rate of dip change and maximum curvature occur. The increase in fracture counts suggests reservoir rocks found in these areas will contain higher overall fracture induced reservoir permeabilities.
Associated Publications
Rights
Copyright of the original work is retained by the author.
Embedded videos